Blog

Stainless steel bathroom vanities are manufactured in two ways: Sheet metal processing, using techniques such as grooving, bending, and six-sided one-

Stainless steel bathroom vanities primarily use 201#, 202#, and 304# stainless steel sheets, manufactured through dozens of sheet metal processes incl

Rodent-proof and abrasion-resistant, preventing damage to internal wires.

The standard center-to-center distance between the two mounting holes for most shower faucets in China is 150mm, and most residences are pre-installed

Shower faucet outlet inner diameter is 1 inch, or 25mm, and is usually fitted with a DN25 valve (faucets installed directly are less common). For hous

2. Avoid installing the faucet too low, too high, too far to the right, or too far to the left. Installing it too low will cause inconvenience, while

One hose typically connects to the cold water source, supplying cold water to the faucet; another connects to the hot water source, supplying hot wate

Turn off the hot and cold water valves, usually located in the cabinet under the sink. Turn the valve handle clockwise until it is tightly closed to s

When disassembling a sink faucet, you might encounter a double-pipe design. This design makes disassembly relatively complex, but it can be easily com

Before disassembling the basin faucet, locate the inlet valve. The inlet valve is usually installed on the wall below the basin. 1. First, tighten the

Concealed installation isn't simply a matter of "burying it and forgetting about it." The location of the access panel, the modularity of the valve bo

The valve core is the heart of the entire system, directly determining the smoothness of opening and closing, the accuracy of temperature control, and