Fujian Feiyasi Kitchen Technology Co., Ltd. is one of the leading manufacturers and suppliers of corrugated hose in China. If you're going to wholesale durable corrugated hose made in China, welcome to get pricelist from our factory. All customized products are with high quality and low price.
Product Details
The faucet end is an M10 brass male rod with a sealing ring, while the supply side uses a G1/2 female connector with a hexagonal nut. This arrangement matches common unequal-end faucet supply layouts. The metal tube should be shaped in a broad curve rather than folded sharply during installation.
Unlike a braided hose built around an EPDM liner, this product uses a single corrugated stainless steel water path. The wave pattern provides the movement needed for routing below the basin. Its all-metal tube is easy to distinguish when buyers need a connector without a rubber inner layer.
Working pressure is 1.0-1.6 MPa, and the hose has a minimum burst rating of 4.0 MPa. The temperature range is 0-120 °C. Length options are 40, 50, 60, 80, 100 and 120 cm. Select a size that reaches both fittings without stretching the corrugations straight.
Product Specifications
|
Product Type: |
Corrugated Faucet Hose |
|
Tube Material: |
304 Stainless Steel |
|
Inner Structure: |
No Rubber Inner Tube |
|
Faucet End: |
M10 Brass Male with Seal |
|
Supply End: |
G1/2 Female Hex Nut |
|
Working Pressure: |
1.0-1.6 MPa |
|
Burst Pressure: |
>=4.0 MPa |
|
Applicable Temperature: |
0-120 °C |
|
Length Options: |
40/50/60/80/100/120 cm |
|
Application: |
Basin and Kitchen Faucets |
Advantages
One-Piece Metal Water Path
The corrugated 304 stainless steel tube carries water without a separate rubber inner hose.
Shapeable Wave Structure
Broad corrugations allow the connector to curve between the faucet body and the supply fitting.
Higher Temperature Range
The 0-120 °C range suits hot- and cold-water faucet connection requirements.
Multiple Connection Lengths
Six standard options help match different distances inside basin and kitchen cabinets.
FAQ
Q: What are the two connection types?
A: The faucet side is M10 male, while the supply end uses a G1/2 female connector.
Q: What operating pressure applies?
A: Working pressure is 1.0-1.6 MPa, with burst pressure of at least 4.0 MPa.
Q: How should the metal hose be routed?
A: Form a broad curve between the fittings and avoid folding the corrugated tube sharply.
Hot Tags: corrugated hose, China corrugated hose manufacturers, suppliers, factory
